Description
Storage, Installation and Use of Grinding Wheel
-, Storage
1. The grinding wheel should be stored in frost-free (and the temperature change is small), preferably at room temperature of about 23°C; In a dry and rust-proof environment, the humidity is less than 30% under ideal conditions;
2. The grinding wheel is a resin binder, and the shelf life theory is not more than 2 years. It is recommended not to use the grinding wheel that exceeds the shelf life;
3. Make sure to put it in the box and take one piece with one piece.
2. handling
1. Do not produce impact during handling, especially side impact, so as to avoid problems during use (Note: Try not to roll the grinding wheel on the ground to prevent possible impact);
2. Do not use tools and methods that may damage the inner hole or other parts of the grinding wheel during handling, so as to avoid unnecessary problems during use due to damage to the grinding wheel.
3. installation
1. Check the grinding wheel, the outer circle and the surface without damage, and then prepare for installation;
2. When installing the grinding wheel, check that the flange surface is clean;
3. Correctly install the accompanying paper pad, one piece on each side of the grinding wheel, stick the wool surface (no color) to the grinding wheel, replace the new grinding wheel, replace the new paper pad, and ensure cleanliness;
The locking force should be uniform, and it is best to have standard locking equipment.
4. use
1. First, after the grinding wheel is installed correctly, it should be idling for 1-3min, and it is best to cut a knife to ensure normal working conditions;
2. The maximum speed for safe use of the grinding wheel is marked on the grinding wheel, and must not exceed this value during use;